Contact us: +44 (0) 1942 671122

Contact us: +44 (0) 1942 671122


Site search by Findberry

SPI LED Controllers

LT-SPI16+M16 SPI Mini-Controller Driver

The LT-SPI16-M16 is a multi-channel LED transmitter & receiver driver designed to control each LED pixel in full colour RGB strips & fixtures. The system utilises advanced RF remote control, wireless signal with high output to achieve long transmission distances.

  • 3-channel SPI control 10A
  • Low voltage operation 5v ~ 24vdc
  • Supports a range of IC types
  • Remote distance 40~50metres

LT-1809 DMX SPI Signal Decoder

The LT-1809 DMX-SPI signal decoder converts DMX512 digital signals to SPI (TTL) digital signal. It may be used in conjunction with our range of addressable LED strips to control individual LED pixels from the on-board IC. Supports a range of compatible IC's.

  • 5v-24vdc

Programming may be carried out from a selection of DMX controllers.

LT-200 DMX-SPI Signal Decoder

The LT-200DMX-SPI is a DMX-SPI signal decoder, which converts the DMX512 digital signal into SPI(TTL) digital signal.

  • 5v~24vdc
  • Supports over 20 different SPI IC's
  • Gray scale level 256 levels/CH (8bit/CH)
  • Dimming range 0-100%
  • May be used as SPI console controller, with 35 effect

LT-DMX-SPI-202 LED Controller

The LT-DMX-SPI-202 LED controller converts DMX512 digital signals to SPI digital signal. It may be used in conjunction with our range of addressable LED strips to control individual LED pixels from the on-board IC. Supports a wide range of compatible IC's.

  • 5v~24vdc
  • 16 built-in effect modes
  • Programming may be carried out from a selection of DMX controllers.

LT-DMX-SPI-203 + M203 Remote LED Controller

The LT-DMX-SPI-203 LED controller converts DMX512 digital signals to SPI digital signal. It may be used in conjunction with our range of addressable LED strips to control individual LED pixels from the on-board IC. Supports a wide range of compatible IC's.

  • 5v~24vdc
  • 16 built-in effect modes
  • Programming may be carried out from a selection of DMX controllers.

LT-122 2/6-Channel SPI Signal Amplifier

The LT-122 is designed to amplify SPI signals generated from controllers to expand systems and enable distribution in multiple lighting schemes.

  • Input voltage 5~36vdc
  • 2x 3channel outputs for RGB
  • 6x 1 channel outputs for mono-colour
  • Waterproof IP67
  • Dimensions L92×W37×H30mm